List of Tables

From Delaware DOT Bridge Design Manual
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
List of Tables
Table 103‑1. Minimum Width Criteria for Bridges1 103.3.2
Table 103‑2. Bridge Rehabilitation (RH) vs Replacement (RP) Worksheet 103.8.6
Table 104‑1. Design Frequency and Confidence Interval 104.2.6
Table 104‑2. DelDOT Scour Design Floor and Check Flood 104.4.3
Table 104‑3. Scour Summary 104.4.6
Table 104‑4. Design Storm for Various Construction Periods 104.5.4
Table 106‑1. DelDOT Bridge Barrier Classifications 106.5.1
Table 106‑2. Suggested Format for Providing Bearing Schedule Loads 106.10.12
Table 107‑1. Foundation Types and Applicable Soil Conditions 107.3
Table 107‑2. Design Criteria for Piles – Precast-Prestressed Concrete 107.3.4.8
Table 107‑3. Design Criteria for Piles – Steel-Pipe Piles 107.3.4.8
Table 107‑4. Design Criteria for Piles – Steel Shell and Cast-in-Place Concrete 107.3.4.8
Table 107‑5. Design Criteria for Piles – Steel H-Sections 107.3.4.8
Table 107‑6. Design Criteria for Piles – Timber 107.3.4.8
Table 107‑7. Design Criteria for Drilled Shafts 107.3.4.8
Table 107‑8. Guide to Pile-Type Selection for Subsurface Conditions 107.3.4.8
Table 107‑9. Guide to Pile-Shape Effects 107.3.4.8
Table 107‑10. Recommended Concrete Type in Corrosive Environments 107.3.5.4.1
Table 109‑1. Laboratory Test Methods 109.2.1
Table 109‑2. Recommended Coring for Deck Testing 109.3.1.4
Table 109‑3. Deck Repair Evaluation Matrix 109.3.2
Table 109‑4. Structural Steels Used in Bridge Construction 109.9.3.3
Table 109‑5. Unfactored Loads for Jacking 109.11.2
Table 109‑6. Factored Loads for Jacking 109.11.2